|
Our Dry Cutting Process with HSS or Carbide.
- Cut at up to 1000 sfm with carbide, or 3-5 times the speed of conventional TiN-coated HSS hobs.
- Reduce the number of machines, capital equipment and labor required.
- Increase tool life up to 5 times that of a conventional HSS hob.
- Reduce cost of resharpening, inventory and tool change.
- Lower tool cost of HSS with A1Nite™ coatings than Carbide.
- Potential to completely eliminate coolant, including maintenance and disposal costs.
Ask yourself...
- Are your machines capable of delivering the high rigidity and spindle speeds required to fully benefit from POWER CUTTING?
- Can they be equipped for running dry?
- How significant is the cost impact of cutting dry on your corporation
- Are you primarily concerned about reducing tooling cost or the overall cost of producing your workpiece.
- These and many other considerations will ultimately decide whether Dry Cutting (with HSS or Carbide) or Conventional cutting wet is right for your operation.
Ask us…
E-mail us for a full cost justification today!
|
[ Click image to enlarge ]
|
